Wet Sanding Tutorial

Here we come, Today I`ll share about wet sanding tutorial :D
Wet sanding is useful, especially if newbie (like me :p ) want to paint their gunplas
Let`s start on what should we prepare :D

1. Sanding Paper

The right one is 500 grit, middle one is 400 grit, and the left one is 1000 grit :D

First, we need to sand the part using 400 grit (I learned this from DC23`s tutorial, it`s up to you whether you want to use 400, or 500, or the others :D )

In my case, I sanded it until the surface became flat (my favorite lol)
Then, you need a 500 and 1000 sand paper (learned from DC23 too :D )

Then I soak 500 grit sandpaper in water, then sand it on the leg

Continue the same way, but now use 1000 grit :D
Sand it again with 1000 grit will remove some scratch, or even all scratch if you did it right.
result
(Not really changed after all, but you can see more details in DC23`s tutorial on wet sanding, enjoy! :D )